Watchtower took care of that for me 👍
Watchtower took care of that for me 👍
Can’t wait to try it !
NVIDIA is only open-sourcing the kernel module. User-space librairies and firmware remain closed source and proprietary.
For comparison, AMD and Intel provide both open-source kernel module and libraries while firmware remains closed and proprietary.
User-space librairies also have a major impact on performance, NVIDIA didn’t make a move towards making these open-source. Also, GPU older than RTX 20xx will not benefit from the new open-source kernel module.
While it will certainly improve things for using NVIDIA GPUs on Linux, it’s nothing revolutionary.
About the power of the hardware, you don’t need to worry too much. My NAS is a SBC with 6 ARM cores and 4GB or RAM. It run flawlessly all the services you’ve listed and more ! (Also, without transcoding for jellyfin).
I don’t know if your budget includes Hard disks, but it should be plenty enough to get you an ready made NAS from Synology or other brands, that will give you an easy start with self-hosting.
If you want to go the DIY route. Then I recommend to build yourself a small computer from a Intel N100 motherboard, or the older J5040. From there you can install Open Media Vault, or otherwise the Linux distribution you are the most familiar with, and install Docker. You can check Linuxserver.io for many guides for spinning up docker containers for all of the services you’ve listed.
Hum yeah, yeah, ok, ok, ok. I am a tiny bit exited.
If I were to rework the drive mounting solution, I would probably redo the whole case from scratch. Currently the drives are slotted inside 5.25" bays and theses are assembled together with 3D printed brackets. I have the impression vibration are not transferring too much to the case and outside.
Maybe I can find some rubber damper that would fit around the drives inside the 5.25" bays.
Thanks, I will look for surveillance types of disks.
Living room is my only option.
Thank you for the suggestions, but this isn’t quite what I am looking for. Moving the NAS to another room isn’t an option, bedroom and bathroom are even less suitable for a NAS :D
I don’t wish to modify the appearance of it either. For one, I’ve spent quite a lot of time designing and building the enclosure from scratch (it’s a unique and original design from my creation). Then, it sits in my TV cabinet and space is an additional concern.
I suppose 5640 RPM wouldn’t make much of a difference compared to 5400, although I’ve never came across such hard disk. I will keep an eye on external drive options, thanks.
I suppose the “low-cost consumer grade” market is now covered by SSDs and the HDD market is moving towards enterprise and enthusiasts only. There is not much market remaining for “lower performance” HDD…
I already have spin-down setup, I can definitely tell when they are spinning up, especially the 7200rpm one. I don’t think it is possible to slow-down the rotation speed of the hard disks, I believe they are just designed to operate at a given speed.
Thank you ! I see there are a few models. I must check were I can source them from at a good price in Europe.
Finamp looks like what you would expect from a music player app. It’s very straight forward to browse you songs by Artists and Albums. It’s easy to make playlists and queue songs ans Albums. Lastly, you can download songs and albums locally and play them offline.
Very exciting news ! I am a daily user of Finamp and I love it.
I did this sort of mistakes too, luckily BTRFS snapshots are always here to save the day !
Armbian
If you can get a hold on a 3D printer, you can try this design: Raspberry Pi 4 NAS with 2x 3.5" bays / impulse1delta / printables.com
If you want a “setup and forget” type of experience, synology will serve you well, if you can afford it. Of you are more of a tinkerer and see yourself experimenting and upgrading in the future, then I recommend custom built. OMV is a solid OS for a novice, but any Linux distro you fancy most can do the job very well!
I’ve started my NAS journey with a very humble 1-bay synology. For the last few years I am using a custom built ARM NAS (nanopi m4v2), with 4-bays and running Armbian. All my services run on docker, I have Jellyfin, *arr, bitwarden and several other servicies running very reliably.
I am curious to see the next series from AMD. I am wishing for a new gaming rig for about a year now. I was really considering getting the 7900XT/XTX. If the mid-range for the next gen is performing well, that might just do it.