Hey everyone, I wanted to ask for some help regarding my DNS setup and for routing requests to my selfhosted services.

Currently I use Pi-Hole as a DNS server with my routers default DNS server as the upstream server. This allowed me to define local DNS entries using Pi-hole and route my requests to these domains directly to my local services. For example I bought a domain a while ago and in preparation for setting it up, I had it entered as a local DNS entry pointing directly to my servers IP address.

Earlier today I finally got around to setting up a cloudflare tunnel to expose one of my services to the outside world using the domain I bought. Ever since I did that, all requests to that domain seem to exit my home network, go through cloudflares network and then return through the tunnel, even though I have a local DNS entry for that domain name.

What I would prefer is for the request to be routed directly to my server instead, since I am in the same network already. Since my DNS server is the Pi-Hole, I figured this should happen automatically.

Is there an issue with my Pi-Hole setup? If there is any information missing I’ll be happy to provide it. I wasn’t sure what information I could safely post here.

Solution

I think I managed to fix the problem. After enabling the option Never forward reverse lookups for private IP ranges in Pi-Hole and clearing my DNS cache again, nslookup only returns local IP addresses instead of the IPv6 address of two cloudflare servers.

    • Scrath@feddit.deOPEnglish
      1·
      1 year ago

      It returned the local IPv4 address of the server and two IPv6 addresses belonging apparently belonging to a cloudflare server in california.

      I think I managed to fix the issue though. I have updated my post to include my solution

      • MangoPenguin@lemmy.blahaj.zoneEnglish
        1·
        1 year ago

        Ah that makes sense, if your server has an IPv6 address you could add another A record in Pihole for that. But it sounds like clearing the cache and stuff solved it.

  • NeoNachtwaechter@lemmy.worldEnglish
    1·
    1 year ago

    Is there a NAT involved?

    In my config, the requests asking for my own servers from the internal network get answered the local address 192.something, and so they cannot get routed ‘outside’.

    When asking from the outside, I do not answer it, so they get the public address from a public DNS.

    • Scrath@feddit.deOPEnglish
      1·
      1 year ago

      I didn’t set anything like that up. Is that something that might be enabled by default on my router? If so, how do I check it?

  • DeBaum@discuss.tchncs.deEnglish
    1·
    1 year ago

    I have the (more or less) same setup. Your DNS entries on your pihole instance should point to the local ip of your server (192.168.x.x).

    If thats the case check the dns settings of your router. Under DHCP settings there should be a input field for your dns server. This has to be the local IP of your pihole.

    One thing you could do to start diagnosing the Problem is running this command: nslookup servicename.yourdomain.tld. This should return your local IP and not a public one.

    How do you determine that the requests are leaving your Network?

    • Scrath@feddit.deOPEnglish
      1·
      1 year ago

      When I use tracert I can see the package going through a server in Frankfurt which is definetely outside of my local network. The final IP address that tracert shows me is from a cloudflare server in california (2606:4700:3033::ac43:b10f) according to this site: https://whatismyipaddress.com/ip-lookup

      Using nslookup for my domain I get 3 addresses. The first two are cloudflare addresses in the US. The final one is my servers local IP address.

      • DeBaum@discuss.tchncs.deEnglish
        1·
        1 year ago

        Pihole seems to upstream your requests although there is a local entry for that domain in your settings. Maybe it has something to do with using IPv6? Maybe your device prefers the cloudflare IPv6 over your local IPv4 address.

        Or Maybe your device queries your pihole as well as your Router to get the IP. Check your current dns server on your device: ipconfig /all (Windows)

        • Scrath@feddit.deOPEnglish
          1·
          1 year ago

          I think I fixed the issue by enabling the Never forward reverse lookups for private IP ranges option in Pi-Hole. After that I flushed my dns cache again and called tracert for my domain name. I only get one hop directly to my server now. nslookup also shows only local addresses now.

        • Scrath@feddit.deOPEnglish
          1·
          1 year ago

          Looking at the output of that command I get the following for my ethernet network interface

          DNS-Server  . . . . . . . . . . . : fd98:1919:5915:0:3053:4134:bdc9:295d
                                          192.168.1.60
                                           fd98:1919:5915:0:3053:4134:bdc9:295d

          Using nslookup on that IPv4 address tells me that all of those addresses are pointing to my pi-hole

          nslookup 192.168.1.60

Server: pi.hole
Address: fd98:1919:5915:0:3053:4134:bdc9:295d

Name: pi.hole
Address: 192.168.1.60

          I’ve added another local DNS entry on my Pi-Hole which points the domain I use to the same server but this time uses its IPv6 address. That doesn’t seem to help though or it takes some time to update. I flushed the DNS cache on my machine after adding this entry though.

  • Uninvited Guest@lemmy.caEnglish
    1·
    1 year ago

    Some things that stand out to me:

    1. You’re using your router’s default DNS as the upstream server. Try specifying an upstream DNS in the settings instead.

    2. Try Pihole + Unbound

    3. Could you provide an anonymized example of how you set up the local DNS entry? E.g. Domain: sub.domain.com IP: 192.168.X.Y

    • Scrath@feddit.deOPEnglish
      1·
      1 year ago

      Thanks for your reply. I think I managed to solve this issue and have updated my post to reflect this. Apparently I had a setting disabled in Pi-Hole which caused my DNS requests to be forwarded upstream for some reason, even though there existed a local DNS entry.

    • Scrath@feddit.deOPEnglish
      1·
      1 year ago

      Do you have a better alternative you can recommend? My upload rate isn’t all that good so I would like to avoid having more traffic than necessary leaving my network if the target is within my network anyway.

        • Scrath@feddit.deOPEnglish
          1·
          1 year ago

          Outside hosting isn’t really something I want to consider. I didn’t mention this in my post but this setup is for my media server which needs a lot of storage space. I don’t know about the pricing for a VPS but I am pretty sure it isn’t as cheap as I would want it. Also uploading my media to a VPS with my upload rate would take a lot of time whenever I want to add something new.

          Using two hostnames for accessing the same service isn’t really an option either unfortunately. The specific part I’m trying to set up is a navidrome server for music. The app I use to access the server is called Symfonium and can only add one address per media server. I could get around that by adding multiple media sources but that would result in all of my media appearing twice in searches.